HBYOB

Stainless Steel Immersion Wort Chiller - 50 ft. x 3/8 in.

Features 50' Stainless Steel 3/8" Tubing 23" Overall Height 9 1/4" Coil diameter 8" Coil Height High quality brass hose adapter included Perfect for all-in-one electric brewing...

Stainless Steel Keg Dry-Hopping Filter

2 3/4 W x 11 1/2 L, 300 micron mesh.

Stainless Steel Quick Disconnect - Female QD x 1/2 in. Barb

This quick disconnect seals up very well without a lot of work in connecting them. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.The quick disconnect...

Stainless Steel Quick Disconnect - Male QD x 1/2 in. Barb

Stainless Steel Quick Disconnect - Male QD x 1/2 in. Barb

Stainless Steel Quick Disconnect - Male QD x 1/2 in. FPT

The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.

Stainless Steel Quick Disconnect - Male QD x 1/2 in. MPT

When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread on the ends for...

Stainless Steel Quick Disconnect - Male QD x3/8 in. Barb

Stainless Steel Quick Disconnect - Male QD x 1/2 in. Barb

Stainless Steel Weldless Kettle Conversion Ball Valve Assembly

1/2" 3 piece ball valve with locking handle.  Barb is 1/2"OD. 

Stainless Steel Wort Chiller (25' x 3/8 in. With Tubing)

An affordable wort chiller made from 25' of 3/8'' Stainless Steel tubing. 8' of vinyl tubing is attached to both the in and the out with a female garden hose fitting on the "water in" side...

Steam Condenser Set w/ Tri-Clamp Weldless Bulkhead - 2 in.

Get to boil faster and increase boil vigor by retaining heat! Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing Avoid the sticky residue that boiling wort...

Sterling Hop Rhizome

Stout Spout for Intertap Beer Faucet

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas...