Product Description
For barley malt only, not for use with corn.
This twin roller mill with aluminum hopper holds 7 pounds of grain, and features two 5" by 1¼" knurled rollers. It will crush your grain evenly for the best mash and runoff.
Rollers are gap-adjustable at both ends with the provided phillips screw calibration screws. The default gap is set at .039", but you can adjust it in the range of .015" to .070" inch. The steel rollers are machined to efficently grab the kernels and pull them through the mill. The detachable handcrank can be removed to install an electric drill. Using a 3/8" drill at 500 rpm gives you a crush rate of 6 pounds per minute.
12" tall hopper, and the board mount is 12" by 12". The included particle board mount is designed to fit on top of a 5 or 6 gallon plastic pail. Click on the More Info link above to see a photo of the bottom of this mill.
Assembly required, you will need to screw the hopper together with the included machine screws and attach the mill to the included base board with two included screws.
